NASTHERMOWOOD · DECKING PROFILE

TALES Thermowood Decking Profile

Thermally modified solid timber decking profile, 9–10 mm thick. Produced in Bucak in Ash and iroko.

Thermowood Dişbudak Zemin Kaplama – PERGE AS — TALES, ash

Wood species

Ash Iroko

Hard, strongly grained and almost knot-free; thermal modification turns it dark brown. For premium applications.

Thickness: 9–10 mm
Width: 90 mm
Length: 750–3000 mm
Appearance: Dark brown, strong grain
Price level
Fixing: Visible screws or hidden clips
Made in: Bucak, Burdur · ITA member (since 2015)
Certificates: Finotrol Oy · TSE · View certificates

Request a price Ash sample

MATERIAL TAKE-OFF

Material list for your deck

Make four choices; the list on the right shows the material that will go to site. Only the sizes we produce can be selected. We take exact quantities from your drawings.

MATERIAL LIST Naswood · Bucak

#	Item	Description	Quantity	Unit

1 m² front view

Technical specifications

Wood species	Ash
Thickness	9–10 mm
Width / net cover	90 / net 95 mm (estimate)
Profile per m²	10.5 m (no waste)
Standard lengths	750–3000 mm

Where it is used

Terraces and balconies
Around pools
Piers and walkways

Where it is not used

Load-bearing members Thermal modification reduces strength. Use glulam for beams and posts.
Ground contact It must not touch the ground or soil directly.
Unventilated installation Without ventilation behind and below, its life is shortened.
Galvanised or black screws The acids in the wood leave stains; stainless steel screws are used.

Installation section

Firm, sloped base
Supporting joists
Ventilation gap below
Thermowood decking, stainless screws or clips
Expansion gap between boards
End sealing on cut ends

Schematic; dimensions in the installation guide.

Questions we hear on site

Do I have to paint it?

No. Left untreated it weathers to silver grey; it does not rot. To keep the colour, use a UV-protective oil; how often depends on the sun exposure.

Screws or clips?

Visible screws are quicker and more economical. Clips hide the fixings for a clean surface. Both use stainless screws, with pre-drilled holes at board ends.

What batten spacing should I use?

It depends on the profile thickness and direction; the material calculator offers 400, 500 and 600 mm. We confirm the spacing for your project with the quotation. Always leave a ventilation gap behind.

Can it go down to the ground?

No. It must not touch the ground or soil; finish it above ground level so it is ventilated from below.

Is it in stock and how fast can you deliver?

We confirm stock of standard sizes and the delivery time with the quotation, based on your quantities.